Electronics (EL Courses)
EL 104 Introduction to Robotics and Mechatronics
3.0 units.
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
An introduction to robotic control applications. Basic electronics including digital,
analog, and microcontroller devices, sensors and transducers, and actuators will be
emphasized for automation control. Topics include Basic, Assembly and C language programming
for robotic control; interfacing of indicators, switches, sensors and transducers;
controlling motion and motors; monitoring and measurement of rotation; measuring light,
temperature and conductance; application of navigation and measurement techniques;
remote control applications; mechanical systems; and the control of frequency and
sound. This course is not open to students who are enrolled in or have received credit
for CEL 104 or ET 104.
EL 105 PC Preventive Maintenance and Upgrading
3.0 units.
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
Necessary skills and information needed to make an informed purchase, maintain, upgrade,
and evaluate personal computer systems. The student will receive hands-on instruction
for performing basic preventive maintenance and the installation of simple upgrades
such as adding RAM, installing hard drives, sound cards, etc. Included is the study
of soldering techniques, electronic part identification, and safety and system operation.
Emphasis will be placed on the student's ability to keep personal computers running
at their best performance levels.
EL 106 Networking Essentials 1
3.0 units.
Advisories: EL 105 - PC Preventive Maintenance and Upgrading ; and EL 125 - Digital Devices and Circuits
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade or Pass/No Pass
First course in a series designed to provide students with knowledge of and laboratory
experiences with current and emerging computer networking technology. Focus will be
on LANs, WANs, OSI models, IP addressing, cabling, CompTIA Network+, and network standards;
the theory behind the various kinds of network architectures and data transmission
methods, and the use of decision-making and problem-solving techniques in applying
science, mathematics, and communication concepts to solve networking problems. Instruction
and training are provided in the proper care, maintenance, and use of networking software,
tools, and equipment. Emphasis will be placed on the Cisco System Certification. Not
open to students who have received credit for CS 106.
EL 107 Networking Essentials 2
3.0 units.
Prerequisite: EL 106 - Networking Essentials 1
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade or Pass/No Pass
Second course in a series designed to provide students with knowledge of and laboratory
experiences with current and emerging computer networking technology. Focus will be
on LANs, WANs, OSI models, IP addressing and router programming; and the theory behind
the various kinds of network architectures and data transmission methods including
network troubleshooting. Emphasis will be placed on the Cisco System Certification.
This course is not open to students who have received credit for CS 107.
EL 108 Networking Essentials 3
2.0 units.
Prerequisite: EL 106 - Networking Essentials 1 ; or EL 107 - Networking Essentials 2
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade or Pass/No Pass
Third course in a series designed to provide students with knowledge of and laboratory
experiences with current and emerging computer networking technology. Focus will be
on LANs, WANs, OSI models, IP addressing and router programming; and the theory behind
the various kinds of network architectures and data transmission methods. Emphasis
will be placed on the Cisco System Certification. This course is not open to students
who are enrolled in or have received credit for CS 108.
EL 109 Networking Essentials 4
2.0 units.
Prerequisite: EL 108 - Networking Essentials 3 ; or EL 106 - Networking Essentials 1 ; or EL 107 - Networking Essentials 2
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade or Pass/No Pass
The final course in a series designed to provide students with knowledge of and laboratory
experiences with current and emerging computer networking technology. Focus will be
on LANs, WANs, OSI models, IP addressing and router programming; and the theory behind
the various kinds of network architectures and data transmission methods. Emphasis
will be placed on the Cisco System Certification. This course is not open to students
who are enrolled in or have received credit for CS 109.
EL 118 Fundamentals of DC and AC Circuits Analysis
3.0 units.
Corequisite: EL 119 - Fundamentals of DC and AC Circuits Analysis Laboratory
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
An introductory study of the nature of electricity; the processes employed in the
analysis and documentation of DC and AC electric circuits, and the use of basic electronics
testing instruments. Topics include: current voltage, resistance, power, reactance,
admittance, resonance, Ohm's law, series parallel and bridge resistive and reactive
circuits, Kirchhoff's voltage and current laws, loading effects of meters and supplies,
capacitators, inductors, filters, RC and RL time constants, applications of Kirchhoff
laws to multiple source series-parallel circuits, complex numbers, and network theorems.
EL 119 Fundamentals of DC and AC Circuits Analysis Laboratory
2.0 units.
Corequisite: EL 118 - Fundamentals of DC and AC Circuits Analysis
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
Provides the student practical experience for the comprehension of DC and AC electrical
concepts introduced in EL 118 (Fundamentals of Circuit Analysis) and also presents
the proper use of electronic test instrumentation for the measurement of circuit parameters.
EL 122 Electronic Devices and Circuits
3.0 units.
Advisories: Concurrent enrollment in; EL 123 - Electronic Devices and Circuits Laboratory
Prerequisite: EL 118 - Fundamentals of DC and AC Circuits Analysis ; and EL 119 - Fundamentals of DC and AC Circuits Analysis Laboratory
Acceptable for credit: Transfer CSU
Course Offered:
Fall
Grading Method: Letter Grade Only
Introductory study of semiconductor devices and systems. A detailed analysis of diodes;
bipolar junction translators and field-effect transistors; biasing techniques, active
circuits, thyristors and optoelectronic components and linear integrated circuits.
EL 123 Electronic Devices and Circuits Laboratory
2.0 units.
Advisories: Completion of or concurrent enrollment in EL 122
Prerequisite: EL 118 - Fundamentals of DC and AC Circuits Analysis ; and EL 119 - Fundamentals of DC and AC Circuits Analysis Laboratory
Acceptable for credit: Transfer CSU
Course Offered:
Fall
Grading Method: Letter Grade Only
Provides the opportunity for the student to apply theoretical semiconductor concepts
in a laboratory environment. Major areas of emphasis include diodes, bipolar junction
transistors, field-effect transistors, thyristers, optoelectronic devices, and linear
integrated circuits.
EL 125 Digital Devices and Circuits
3.0 units.
Prerequisite: EL 118 - Fundamentals of DC and AC Circuits Analysis ; and EL 119 - Fundamentals of DC and AC Circuits Analysis Laboratory
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
Study of modern logic devices, circuits and design techniques emphasizing logic families,
implementation of devices, combinational and sequential logic circuits, number systems
and codes, A/D and D/A conversion, ALU's, digital computer math techniques, memories,
system design and troubleshooting practices.
EL 126 Digital Devices and Circuits Lab
2.0 units.
Advisories: Completion of or concurrent enrollment in EL 125
Prerequisite: EL 118 - Fundamentals of DC and AC Circuits Analysis ; and EL 119 - Fundamentals of DC and AC Circuits Analysis Laboratory
Acceptable for credit: Transfer CSU
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
Digital electronics laboratory designed to parallel Digital Devices and Circuits (EL
125). Emphasizes device operation in circuits and networks and the proper use of standard
digital logic test instruments used in the process of troubleshooting and verifying
proper circuit operations.
EL 128 Introduction to Renewable Energy
3.0 units.
Prerequisite: CEL 104 - Introduction to Robotics and Mechatronics ; or ET 104 or EL 104
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
A study of the principles behind energy generation and conversion that can be applied
to modern electrical, mechanical, and chemical devices that use or produce power.
Special emphasis will be given to the study of electricity as a renewable energy source.
This course is not open to students who are enrolled in or have received credit for
CEL 128 or ET 128.
EL 131 Programmable Logic Controllers and Control Design
3.0 units.
Prerequisite: EL 125 - Digital Devices and Circuits
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
A study of the purpose and operating features of a programmable logic controller (PLC).
Topics include PLC terminology, architecture, input/output modules, memory, commands
for internal relays, on/off timers, up/down counters, use of subroutines, program
control, and math instructions. Relay schematics, ladder logic diagrams, and programming
of logic controllers are emphasized. Sensing devices and time-driven process sequences
will be studied and integrated into control systems. This course is not open to students
who are enrolled in or have received credit for CEL 131 or ET 131.
EL 133 Mechatronic Systems 1
3.0 units.
Prerequisite: CEL 104 - Introduction to Robotics and Mechatronics or EL 104 or ET 104
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
This is a hands-on mechatronic systems course that focuses on the electromechanical
concepts (mechanics, electronic, and programming) of automated systems. Emphasis is
placed on how industrial grade sensors and transducers function and upon how they
are interfaced into control systems. Study topics include: transducers and sensors
for light, heat, motion, pressure, and position control; switching devices; input
and output signal conditioning; continuous, closed-loop, and proportional integral
derivative process control; and safety. This course is not open to students who have
received credit for, or are enrolled in ET 133 or CEL 133.
EL 135 Electronic Measurement and Instrumentation
3.0 units.
Advisories: Concurrent enrollment in EL 136 is recommended
Prerequisite: EL 122 - Electronic Devices and Circuits ; and EL 123 - Electronic Devices and Circuits Laboratory ; and EL 125 - Digital Devices and Circuits ; and EL 126 - Digital Devices and Circuits Lab
Acceptable for credit: Transfer CSU
Course Offered:
Fall
Grading Method: Letter Grade Only
Designed to familiarize students with operating principles and characteristics of
basic electronic testing equipment as well as advanced specialized measuring instruments.
Methods of operation and calibration of these devices are covered including an overview
of Automated Test Equipment (ATE) systems.
EL 136 Electronics Measurement and Instrumentation Laboratory
2.0 units.
Corequisite: EL 135 - Electronic Measurement and Instrumentation
Prerequisite: EL 122 - Electronic Devices and Circuits ; and EL 123 - Electronic Devices and Circuits Laboratory ; and EL 125 - Digital Devices and Circuits ; and EL 126 - Digital Devices and Circuits Lab
Acceptable for credit: Transfer CSU
Course Offered:
Fall
Grading Method: Letter Grade Only
Provides hands-on laboratory experience for the study and construction of electronic
testing instruments. The student is introduced to many different types of testing
equipment currently used by the electronics industry.
EL 139 Electrical Power, Motors, and Controls
3.0 units.
Prerequisite: EL 122 - Electronic Devices and Circuits ; and EL 125 - Digital Devices and Circuits
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
A study of electronics, signal communication and power technology that support efficient
manufacturing processes for various industries. Topics include motors, their drives
and controls, power electronics, PLCs, and communications networks used to monitor
industrial processes. This course is not open to students who are enrolled in or have
received credit for CEL 139 or ET 139.
EL 146 Electronic Product Design, Fabrication and Documentation
2.0 units.
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
A study of product fabrication emphasizing mechatronic applications and designs. Topics
include the design process; CADD drawings, schematics, diagrams, and support graphic
requirements; printed circuit board layout and population techniques; technical writing;
project documentation requirements; surface mount technologies; prototyping; printed
circuit board testing, troubleshooting, and final documentation emphasizing hands-on
experiences. The use of industry standard computer aided drafting and support software
will be studied and utilized in all phases of documentation through camera ready artwork.
EL 162 Fluid Power And Control
2.0 units.
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
An introduction to the generation, control and basic applications of hydraulics and
pneumatics force and motion systems. Topics include safety, properties of and forces
in liquids, pumps, motors, valves, reservoirs, strainers, filters, accumulators, basic
diagramming, system design and troubleshooting. This course is not open to students
who are enrolled in or have received credit for CEL 162 or ET 162.
EL 189 Independent Projects in Electronics
1.0 - 3.0 units.
Acceptable for credit: Transfer CSU
Grading Method: Letter Grade Only
Courses for students capable of independent work who demonstrate the need or desire
for additional study beyond the regular curriculum. Enrollment allows students to
pursue activities such as directed field experience, research, or development of skills
and competencies under faculty advisement and supervision. Independent projects may
be earned in most disciplines.
Students wishing to enroll in Independent Projects should contact the appropriate
instructor identified in the class schedule. If the project proposed is acceptable
to that instructor, a contract will be developed.
All contracts for these classes must be completed and approved by the appropriate
dean before the last day of the enrollment.
Units are awarded depending upon satisfactory performance and the amount of time committed
by the student to the course. Allowable units vary according to discipline, and are
based on the following formula:
1 unit - 48 hours per semester
2 units - 96 hours per semester
3 units - 144 hours per semester
EL 320 A+ Certification
2.5 units.
Advisories: EL 105 - PC Preventive Maintenance and Upgrading
Acceptable for credit: D - Credit - Degree Applicable
Grading Method: Letter Grade Only
Computer repair and maintenance with a focus on preparations required for achieving
the industry standard CompTIA A+ Certification. The hands-on study includes the A+
Core Test Domains and the Windows/DOS Test Domains. This course is not open to students
who have received credit for CS 320.
EL 332 Wireless Network Administrator
3.0 units.
Acceptable for credit: D - Credit - Degree Applicable
Grading Method: Letter Grade or Pass/No Pass
A study of the basic concepts and technologies of wireless data networking. Includes
basic RF theory, WiFi infrastructure, link budget math, troubleshooting techniques,
site survey skills, and security measures. Prepares students to take the CWNA Certification
Exam at Prometric Testing Centers. This course is not open to students who have completed
or who are currently enrolled in CS 332.
EL 333 Introduction to Network Security
2.0 units.
Prerequisite: EL 106 - Networking Essentials 1
Acceptable for credit: D - Credit - Degree Applicable
Course Offered:
Fall, Spring
Grading Method: Letter Grade Only
A comprehensive overview of network security. General security concepts, communications
security, infrastructure security, basics of cryptography, and operational/organizational
security will be covered. Prepares students to take the CompTIA Security+ Certification
Exam at Prometric or Vue sites.
EL 370 SkillsUSA
3.0 units.
Acceptable for credit: D - Credit - Degree Applicable
Repeatable: 3.00
Course Offered:
Fall
Grading Method: Letter Grade or Pass/No Pass
SkillsUSA is a partnership of students, teachers and industry working together to
ensure America has a skilled workforce. This SkillsUSA course prepares students for
employment and inter-collegiate competition in Career Technical Education. Students
will learn to plan projects, work in teams, solicit community support and develop
a range of skills valued by employers. Students registered for this class may not
register for AB 370, ARCH 370, AT 370, ET 370, MT 370 or WLDT 370 during the same
semester. Participation in the SkillsUSA competition is required. This course may
be repeated up to three times for credit with different competitions.